TALYUM is a fully domestically designed product family we developed to carry field measurements to the control centre without interruption and reliably. Every link in the chain, from the sensor to the web interface, is produced through our own R&D, so it also works in rural areas, in humid and harsh environments and under weak signal conditions.
Product Family
TALYUM Sensor
Sensor solutions for water quality and process measurements.
- pH
- TSS (total suspended solids)
- COD
- COD (chemical oxygen demand)
- Level, flow and pressure
TALYUM Datalogger
The unit that collects and logs data in the field and manages its own power.
- Self-charging with a Li-ion battery
- Any power source between 8–55 V
- Local data logging on SD card
- Modbus protocol support
- Deep-discharge protection
TALYUM Modem
The communication unit that transmits data from locations with poor signal quality.
- GSM and RF transmission options
- Compatible with all GSM operators
- Integrated Li-ion battery
- Image and data transmission even at low bandwidth
TALYUM Data Acquisition Software
The software layer that validates, archives and shares the collected data.
- Driver-based data acquisition architecture
- Secure transmission over the internet
- Integration with your existing automation and business systems
- Web, iOS, Android and Windows interfaces
Three Field Problems TALYUM Solves
1. The operator problem
In rural areas, depending on a single operator’s coverage means data loss. TALYUM Modem works with all GSM operators; where there is no coverage, RF transmission takes over.
2. The environment problem
It is designed to operate in humid, wet, cold and hot environments. It keeps generating its own power and sending data in the shade, in cloudy weather and in the rain.
3. The power problem
Thanks to its integrated Li-ion charging system and wide 8–55 V AC/DC input range, it runs on whatever power is available on site — mains, solar panel or battery.
Application Areas
- Wastewater billing in organised industrial zones
- Remote reading of electricity, natural gas and water meters
- Agricultural and meteorological stations
- Data acquisition in rural areas
- Monitoring and environmental flow tracking at power plants
- Predictive maintenance systems
- Energy efficiency monitoring in factories
- Occupational health parameters (noise, light, vibration, temperature)
Field-proven scale
The integrated meter reading system we built with 700 TALYUM modems at Kemalpaşa OIZ is the first application in Türkiye to combine electricity, natural gas and wastewater networks on a single platform.
Let’s adapt TALYUM to your project
Share the parameter you want to measure and your field conditions, and let’s define the right configuration together.
Phone: 0232 237 55 55 · E-mail: info@siyadsistem.com